Your Application
Solution Definition
Mass Production
> Share where and how the motor is used, with a sample motor or drawings if available
> We match an existing model or configure a suitable solution
> Quotation follows based on the confirmed scope
Single-Phase
Induction motor
• Simple AC supply environments
• Small to medium power loads
• Cost-sensitive systems
• Continuous operation with low control demand
• Lower starting torque (vs. 3-phase)
• Lower efficiency & power factor
• Limited speed control
Three-Phase
Induction motor
• Speed varies with load (slip)
• Precise speed control not possible
• VFD required for speed regulation
PMSM (Permanent Magnet Synchronous motor)
• High efficiency (IE4/IE5)
• High torque density
• Precise speed & position control
• Dynamic response applications
BLDC motor
• High efficiency & low noise
• Long lifetime (no brushes)
• Wide speed regulation range
• Compact system design
• Requires dedicated controller
• Higher system complexity
• Higher cost than brushed DC
Brushed
DC Motor
• Simple speed control (voltage)
• Low initial cost
• Good starting torque
• Easy integration
• Brush wear limits lifetime
• Lower efficiency
• Higher maintenance
Universalmotor
• Very high starting torque
• Very high speed capability
• Compact & lightweight
• Works on AC or DC
• Poor speed control accuracy
• High noise & vibration
• Low efficiency
• Short service life
Start Torque · Duty Cycle · Temp Rise · Noise · IP
Global 110V-240V, 50/60Hz support
Custom shafts, flanges & housings
Thermal protection & IP55+ options
Controller matching & tuning
Systematic gates from RFQ to Mass Production.
RFQ checklist completed
2-3 options w/ trade-offs
Sample plan & schedule
Test plan & criteria
PPAP package
Routine test & Delivery
Critical material inspection
Key manufacturing checkpoints
Hipot · IR ·
Ground
Current · Speed · Torque
NVH consistency control
Routine &
traceable
We mitigate geopolitical and supply chain risks through a diversified footprint. Your motors are produced where it makes the most sense for tariff, logistics, and material availability.
R&D Center + High-Volume Production (80k/mo capacity)
Export-focused assembly for US/EU compliance
Regional logistics hub & buffer stock
Sample: 7-10 Days | Pilot: 25 Days | Mass Production: 35-45 Days
Result:
Result:
Result:
Answer 3 steps to help our engineers build your platform shortlist.
Pro Tip: Uploading a nameplate photo helps us match 50% faster.
Ideally: Application duty cycle, torque/speed requirements, voltage/frequency, and mechanical interface dimensions. Photos of existing motors help significantly.
Yes. We configure windings for 100V, 110V, 120V, 220V, 230V, 240V at both 50Hz and 60Hz depending on your target market.
For standard platforms, MOQ is flexible. For highly customized tooling, we typically require 500-1000 units per order after pilot runs.
Our factories are ISO 9001 and IATF 16949 certified. We support component certification for UL, CE, CCC, RoHS, and REACH upon request.
Adresse:No.121,Xinlong Road，Zhonglou Xinzha Subdistrict，Changzhou City, Jiangsu Province, China
Telefon: +86-18261152679
Whatsapp: +86-18261152679
E-Mail: sales@honestmotor.cn
Datenschutz / Nutzungsbedingungen / Cookie-Einstellungen / Site Map
© 2025 Honest Alle Rechte vorbehalten.
